|
Hopefully, this page is exactly what you are looking for, but if not, you can always find further assistance on Unix/Linux Forum!
<float.h>(P) POSIX Programmer's Manual <float.h>(P)
NAME
float.h - floating types
SYNOPSIS
#include <float.h>
DESCRIPTION
The characteristics of floating types are defined in terms of a model
that describes a representation of floating-point numbers and values
that provide information about an implementation's floating-point
arithmetic.
The following parameters are used to define the model for each float-
ing-point type:
s Sign (±1).
b Base or radix of exponent representation (an integer >1).
e Exponent (an integer between a minimum e_min and a maximum
e_max).
p Precision (the number of base-b digits in the significand).
f_k Non-negative integers less than b (the significand digits).
A floating-point number x is defined by the following model:
In addition to normalized floating-point numbers (f_1>0 if x!=0),
floating types may be able to contain other kinds of floating-point
numbers, such as subnormal floating-point numbers ( x!=0, e= e_min,
f_1=0) and unnormalized floating-point numbers ( x!=0, e> e_min,
f_1=0), and values that are not floating-point numbers, such as infini-
ties and NaNs. A NaN is an encoding signifying Not-a-Number. A quiet
NaN propagates through almost every arithmetic operation without rais-
ing a floating-point exception; a signaling NaN generally raises a
floating-point exception when occurring as an arithmetic operand.
The accuracy of the floating-point operations ( '+' , '-' , '*' , '/' )
and of the library functions in <math.h> and <complex.h> that return
floating-point results is implementation-defined. The implementation
may state that the accuracy is unknown.
All integer values in the <float.h> header, except FLT_ROUNDS, shall be
constant expressions suitable for use in #if preprocessing directives;
all floating values shall be constant expressions. All except DECI-
MAL_DIG, FLT_EVAL_METHOD, FLT_RADIX, and FLT_ROUNDS have separate names
for all three floating-point types. The floating-point model represen-
tation is provided for all values except FLT_EVAL_METHOD and
FLT_ROUNDS.
The rounding mode for floating-point addition is characterized by the
implementation-defined value of FLT_ROUNDS:
-1 Indeterminable.
0 Toward zero.
1 To nearest.
2 Toward positive infinity.
3 Toward negative infinity.
All other values for FLT_ROUNDS characterize implementation-defined
rounding behavior.
The values of operations with floating operands and values subject to
the usual arithmetic conversions and of floating constants are evalu-
ated to a format whose range and precision may be greater than required
by the type. The use of evaluation formats is characterized by the
implementation-defined value of FLT_EVAL_METHOD:
-1 Indeterminable.
0 Evaluate all operations and constants just to the range and pre-
cision of the type.
1 Evaluate operations and constants of type float and double to
the range and precision of the double type; evaluate long double
operations and constants to the range and precision of the long
double type.
2 Evaluate all operations and constants to the range and precision
of the long double type.
All other negative values for FLT_EVAL_METHOD characterize implementa-
tion-defined behavior.
The values given in the following list shall be defined as constant
expressions with implementation-defined values that are greater or
equal in magnitude (absolute value) to those shown, with the same sign.
* Radix of exponent representation, b.
FLT_RADIX
2
* Number of base-FLT_RADIX digits in the floating-point significand,
p.
FLT_MANT_DIG
DBL_MANT_DIG
LDBL_MANT_DIG
* Number of decimal digits, n, such that any floating-point number in
the widest supported floating type with p_max radix b digits can be
rounded to a floating-point number with n decimal digits and back
again without change to the value.
DECIMAL_DIG
10
* Number of decimal digits, q, such that any floating-point number
with q decimal digits can be rounded into a floating-point number
with p radix b digits and back again without change to the q decimal
digits.
FLT_DIG
6
DBL_DIG
10
LDBL_DIG
10
* Minimum negative integer such that FLT_RADIX raised to that power
minus 1 is a normalized floating-point number, e_min.
FLT_MIN_EXP
DBL_MIN_EXP
LDBL_MIN_EXP
* Minimum negative integer such that 10 raised to that power is in the
range of normalized floating-point numbers.
FLT_MIN_10_EXP
-37
DBL_MIN_10_EXP
-37
LDBL_MIN_10_EXP
-37
* Maximum integer such that FLT_RADIX raised to that power minus 1 is
a representable finite floating-point number, e_max.
FLT_MAX_EXP
DBL_MAX_EXP
LDBL_MAX_EXP
* Maximum integer such that 10 raised to that power is in the range of
representable finite floating-point numbers.
FLT_MAX_10_EXP
+37
DBL_MAX_10_EXP
+37
LDBL_MAX_10_EXP
+37
The values given in the following list shall be defined as constant
expressions with implementation-defined values that are greater than or
equal to those shown:
* Maximum representable finite floating-point number.
FLT_MAX
1E+37
DBL_MAX
1E+37
LDBL_MAX
1E+37
The values given in the following list shall be defined as constant
expressions with implementation-defined (positive) values that are less
than or equal to those shown:
* The difference between 1 and the least value greater than 1 that is
representable in the given floating-point type, b**1-p.
FLT_EPSILON
1E-5
DBL_EPSILON
1E-9
LDBL_EPSILON
1E-9
* Minimum normalized positive floating-point number, b**e_min.
FLT_MIN
1E-37
DBL_MIN
1E-37
LDBL_MIN
1E-37
The following sections are informative.
APPLICATION USAGE
None.
RATIONALE
None.
FUTURE DIRECTIONS
None.
SEE ALSO
<complex.h> , <math.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of
Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online
at http://www.opengroup.org/unix/online.html .
IEEE/The Open Group 2003 <float.h>(P)
Man(1) output converted with
man2html and wrapped by fishsponge
This page was generated on Sat Sep 8 16:41:10 GMT 2007
|
Your favourite pages:
No pages logged yet.
Trying to save cookie... Top 10 most popular pages:
ssh man page (4011 hits)
(Suse Linux 10.1)
CPAN man page (3936 hits)
(Suse Linux 10.1)
startproc man page (1431 hits)
(Suse Linux 10.1)
svn man page (1147 hits)
(FreeBSD 6.2)
signal man page (1068 hits)
(Suse Linux 10.1)
lwptut man page (1033 hits)
(Suse Linux 10.1)
startpar man page (808 hits)
(Suse Linux 10.1)
netcat man page (796 hits)
(Suse Linux 10.1)
Net::Config man page (740 hits)
(Suse Linux 10.1)
oowriter man page (720 hits)
(Suse Linux 10.1)
|
Man Pages 
