|
Hopefully, this page is exactly what you are looking for, but if not, you can always find further assistance on Unix/Linux Forum!
rsyncd.conf(5) rsyncd.conf(5)
NAME
rsyncd.conf - configuration file for rsync in daemon mode
SYNOPSIS
rsyncd.conf
DESCRIPTION
The rsyncd.conf file is the runtime configuration file for rsync when
run as an rsync daemon.
The rsyncd.conf file controls authentication, access, logging and
available modules.
FILE FORMAT
The file consists of modules and parameters. A module begins with the
name of the module in square brackets and continues until the next mod-
ule begins. Modules contain parameters of the form 'name = value'.
The file is line-based -- that is, each newline-terminated line repre-
sents either a comment, a module name or a parameter.
Only the first equals sign in a parameter is significant. Whitespace
before or after the first equals sign is discarded. Leading, trailing
and internal whitespace in module and parameter names is irrelevant.
Leading and trailing whitespace in a parameter value is discarded.
Internal whitespace within a parameter value is retained verbatim.
Any line beginning with a hash (#) is ignored, as are lines containing
only whitespace.
Any line ending in a \ is "continued" on the next line in the customary
UNIX fashion.
The values following the equals sign in parameters are all either a
string (no quotes needed) or a boolean, which may be given as yes/no,
0/1 or true/false. Case is not significant in boolean values, but is
preserved in string values.
LAUNCHING THE RSYNC DAEMON
The rsync daemon is launched by specifying the --daemon option to
rsync.
The daemon must run with root privileges if you wish to use chroot, to
bind to a port numbered under 1024 (as is the default 873), or to set
file ownership. Otherwise, it must just have permission to read and
write the appropriate data, log, and lock files.
You can launch it either via inetd, as a stand-alone daemon, or from an
rsync client via a remote shell. If run as a stand-alone daemon then
just run the command "rsync --daemon" from a suitable startup script.
When run via inetd you should add a line like this to /etc/services:
rsync 873/tcp
and a single line something like this to /etc/inetd.conf:
rsync stream tcp nowait root /usr/bin/rsync rsyncd --daemon
Replace "/usr/bin/rsync" with the path to where you have rsync
installed on your system. You will then need to send inetd a HUP sig-
nal to tell it to reread its config file.
Note that you should not send the rsync daemon a HUP signal to force it
to reread the rsyncd.conf file. The file is re-read on each client con-
nection.
GLOBAL OPTIONS
The first parameters in the file (before a [module] header) are the
global parameters.
You may also include any module parameters in the global part of the
config file in which case the supplied value will override the default
for that parameter.
motd file
The "motd file" option allows you to specify a "message of the
day" to display to clients on each connect. This usually con-
tains site information and any legal notices. The default is no
motd file.
log file
The "log file" option tells the rsync daemon to log messages to
that file rather than using syslog. This is particularly useful
on systems (such as AIX) where syslog() doesn't work for
chrooted programs. If the daemon fails to open to specified
file, it will fall back to using syslog and output an error
about the failure. (Note that a failure to open the specified
log file used to be a fatal error.)
pid file
The "pid file" option tells the rsync daemon to write its pro-
cess ID to that file.
syslog facility
The "syslog facility" option allows you to specify the syslog
facility name to use when logging messages from the rsync dae-
mon. You may use any standard syslog facility name which is
defined on your system. Common names are auth, authpriv, cron,
daemon, ftp, kern, lpr, mail, news, security, syslog, user,
uucp, local0, local1, local2, local3, local4, local5, local6 and
local7. The default is daemon.
port You can override the default port the daemon will listen on by
specifying this value (defaults to 873). This is ignored if the
daemon is being run by inetd, and is superseded by the --port
command-line option.
address
You can override the default IP address the daemon will listen
on by specifying this value. This is ignored if the daemon is
being run by inetd, and is superseded by the --address command-
line option.
socket options
This option can provide endless fun for people who like to tune
their systems to the utmost degree. You can set all sorts of
socket options which may make transfers faster (or slower!).
Read the man page for the setsockopt() system call for details
on some of the options you may be able to set. By default no
special socket options are set. These settings are superseded
by the --sockopts command-line option.
slp refresh
This option is used to determine how long service advertisements
are valid (measured in seconds), and is only applicable if you
have Service Location Protocol support compiled in. If this
option is not set or is set to zero, then service advertisements
never time out. If this is set to less than 120 seconds, then
120 seconds is used. If it is set to more than 65535, then 65535
is used (which is a limitation of SLP). Using 3600 (one hour)
is a good number if you tend to change your configuration.
MODULE OPTIONS
After the global options you should define a number of modules, each
module exports a directory tree as a symbolic name. Modules are
exported by specifying a module name in square brackets [module] fol-
lowed by the options for that module.
comment
The "comment" option specifies a description string that is dis-
played next to the module name when clients obtain a list of
available modules. The default is no comment.
path The "path" option specifies the directory in the daemon's
filesystem to make available in this module. You must specify
this option for each module in rsyncd.conf.
use chroot
If "use chroot" is true, the rsync daemon will chroot to the
"path" before starting the file transfer with the client. This
has the advantage of extra protection against possible implemen-
tation security holes, but it has the disadvantages of requiring
super-user privileges, of not being able to follow symbolic
links that are either absolute or outside of the new root path,
and of complicating the preservation of usernames and groups
(see below). When "use chroot" is false, for security reasons,
symlinks may only be relative paths pointing to other files
within the root path, and leading slashes are removed from most
absolute paths (options such as --backup-dir, --compare-dest,
etc. interpret an absolute path as rooted in the module's "path"
dir, just as if chroot was specified). The default for "use
chroot" is true.
In order to preserve usernames and groupnames, rsync needs to be
able to use the standard library functions for looking up names
and IDs (i.e. getpwuid(), getgrgid(), getpwname(), and getgr-
nam()). This means a process in the chroot namespace will need
to have access to the resources used by these library functions
(traditionally /etc/passwd and /etc/group). If these resources
are not available, rsync will only be able to copy the IDs, just
as if the --numeric-ids option had been specified.
Note that you are free to setup user/group information in the
chroot area differently from your normal system. For example,
you could abbreviate the list of users and groups. Also, you
can protect this information from being downloaded/uploaded by
adding an exclude rule to the rsyncd.conf file (e.g. "exclude =
/etc/**"). Note that having the exclusion affect uploads is a
relatively new feature in rsync, so make sure your daemon is at
least 2.6.3 to effect this. Also note that it is safest to
exclude a directory and all its contents combining the rule
"/some/dir/" with the rule "/some/dir/**" just to be sure that
rsync will not allow deeper access to some of the excluded files
inside the directory (rsync tries to do this automatically, but
you might as well specify both to be extra sure).
max connections
The "max connections" option allows you to specify the maximum
number of simultaneous connections you will allow. Any clients
connecting when the maximum has been reached will receive a mes-
sage telling them to try later. The default is 0 which means no
limit. See also the "lock file" option.
max verbosity
The "max verbosity" option allows you to control the maximum
amount of verbose information that you'll allow the daemon to
generate (since the information goes into the log file). The
default is 1, which allows the client to request one level of
verbosity.
lock file
The "lock file" option specifies the file to use to support the
"max connections" option. The rsync daemon uses record locking
on this file to ensure that the max connections limit is not
exceeded for the modules sharing the lock file. The default is
/var/run/rsyncd.lock.
read only
The "read only" option determines whether clients will be able
to upload files or not. If "read only" is true then any
attempted uploads will fail. If "read only" is false then
uploads will be possible if file permissions on the daemon side
allow them. The default is for all modules to be read only.
write only
The "write only" option determines whether clients will be able
to download files or not. If "write only" is true then any
attempted downloads will fail. If "write only" is false then
downloads will be possible if file permissions on the daemon
side allow them. The default is for this option to be disabled.
list The "list" option determines if this module should be listed
when the client asks for a listing of available modules. By set-
ting this to false you can create hidden modules. The default is
for modules to be listable.
uid The "uid" option specifies the user name or user ID that file
transfers to and from that module should take place as when the
daemon was run as root. In combination with the "gid" option
this determines what file permissions are available. The default
is uid -2, which is normally the user "nobody".
gid The "gid" option specifies the group name or group ID that file
transfers to and from that module should take place as when the
daemon was run as root. This complements the "uid" option. The
default is gid -2, which is normally the group "nobody".
filter The "filter" option allows you to specify a space-separated list
of filter rules that the daemon will not allow to be read or
written. This is only superficially equivalent to the client
specifying these patterns with the --filter option. Only one
"filter" option may be specified, but it may contain as many
rules as you like, including merge-file rules. Note that per-
directory merge-file rules do not provide as much protection as
global rules, but they can be used to make --delete work better
when a client downloads the daemon's files (if the per-dir merge
files are included in the transfer).
exclude
The "exclude" option allows you to specify a space-separated
list of patterns that the daemon will not allow to be read or
written. This is only superficially equivalent to the client
specifying these patterns with the --exclude option. Only one
"exclude" option may be specified, but you can use "-" and "+"
before patterns to specify exclude/include.
Because this exclude list is not passed to the client it only
applies on the daemon: that is, it excludes files received by a
client when receiving from a daemon and files deleted on a dae-
mon when sending to a daemon, but it doesn't exclude files from
being deleted on a client when receiving from a daemon.
exclude from
The "exclude from" option specifies a filename on the daemon
that contains exclude patterns, one per line. This is only
superficially equivalent to the client specifying the --exclude-
from option with an equivalent file. See the "exclude" option
above.
include
The "include" option allows you to specify a space-separated
list of patterns which rsync should not exclude. This is only
superficially equivalent to the client specifying these patterns
with the --include option because it applies only on the daemon.
This is useful as it allows you to build up quite complex
exclude/include rules. Only one "include" option may be speci-
fied, but you can use "+" and "-" before patterns to switch
include/exclude. See the "exclude" option above.
include from
The "include from" option specifies a filename on the daemon
that contains include patterns, one per line. This is only
superficially equivalent to the client specifying the --include-
from option with a equivalent file. See the "exclude" option
above.
incoming chmod
This option allows you to specify a set of comma-separated chmod
strings that will affect the permissions of all incoming files
(files that are being received by the daemon). These changes
happen after all other permission calculations, and this will
even override destination-default and/or existing permissions
when the client does not specify --perms. See the description
of the --chmod rsync option and the chmod(1) manpage for infor-
mation on the format of this string.
outgoing chmod
This option allows you to specify a set of comma-separated chmod
strings that will affect the permissions of all outgoing files
(files that are being sent out from the daemon). These changes
happen first, making the sent permissions appear to be different
than those stored in the filesystem itself. For instance, you
could disable group write permissions on the server while having
it appear to be on to the clients. See the description of the
--chmod rsync option and the chmod(1) manpage for information on
the format of this string.
auth users
The "auth users" option specifies a comma and space-separated
list of usernames that will be allowed to connect to this mod-
ule. The usernames do not need to exist on the local system. The
usernames may also contain shell wildcard characters. If "auth
users" is set then the client will be challenged to supply a
username and password to connect to the module. A challenge
response authentication protocol is used for this exchange. The
plain text usernames and passwords are stored in the file speci-
fied by the "secrets file" option. The default is for all users
to be able to connect without a password (this is called "anony-
mous rsync").
See also the "CONNECTING TO AN RSYNC DAEMON OVER A REMOTE SHELL
PROGRAM" section in rsync(1) for information on how handle an
rsyncd.conf-level username that differs from the remote-shell-
level username when using a remote shell to connect to an rsync
daemon.
secrets file
The "secrets file" option specifies the name of a file that con-
tains the username:password pairs used for authenticating this
module. This file is only consulted if the "auth users" option
is specified. The file is line based and contains username:pass-
word pairs separated by a single colon. Any line starting with a
hash (#) is considered a comment and is skipped. The passwords
can contain any characters but be warned that many operating
systems limit the length of passwords that can be typed at the
client end, so you may find that passwords longer than 8 charac-
ters don't work.
There is no default for the "secrets file" option, you must
choose a name (such as /etc/rsyncd.secrets). The file must nor-
mally not be readable by "other"; see "strict modes".
strict modes
The "strict modes" option determines whether or not the permis-
sions on the secrets file will be checked. If "strict modes" is
true, then the secrets file must not be readable by any user ID
other than the one that the rsync daemon is running under. If
"strict modes" is false, the check is not performed. The
default is true. This option was added to accommodate rsync
running on the Windows operating system.
hosts allow
The "hosts allow" option allows you to specify a list of pat-
terns that are matched against a connecting clients hostname and
IP address. If none of the patterns match then the connection is
rejected.
Each pattern can be in one of five forms:
o a dotted decimal IPv4 address of the form a.b.c.d, or an
IPv6 address of the form a:b:c::d:e:f. In this case the
incoming machine's IP address must match exactly.
o an address/mask in the form ipaddr/n where ipaddr is the
IP address and n is the number of one bits in the net-
mask. All IP addresses which match the masked IP address
will be allowed in.
o an address/mask in the form ipaddr/maskaddr where ipaddr
is the IP address and maskaddr is the netmask in dotted
decimal notation for IPv4, or similar for IPv6, e.g.
ffff:ffff:ffff:ffff:: instead of /64. All IP addresses
which match the masked IP address will be allowed in.
o a hostname. The hostname as determined by a reverse
lookup will be matched (case insensitive) against the
pattern. Only an exact match is allowed in.
o a hostname pattern using wildcards. These are matched
using the same rules as normal unix filename matching. If
the pattern matches then the client is allowed in.
Note IPv6 link-local addresses can have a scope in the address
specification:
fe80::1%link1
fe80::%link1/64
fe80::%link1/ffff:ffff:ffff:ffff::
You can also combine "hosts allow" with a separate "hosts deny"
option. If both options are specified then the "hosts allow"
option s checked first and a match results in the client being
able to connect. The "hosts deny" option is then checked and a
match means that the host is rejected. If the host does not
match either the "hosts allow" or the "hosts deny" patterns then
it is allowed to connect.
The default is no "hosts allow" option, which means all hosts
can connect.
hosts deny
The "hosts deny" option allows you to specify a list of patterns
that are matched against a connecting clients hostname and IP
address. If the pattern matches then the connection is rejected.
See the "hosts allow" option for more information.
The default is no "hosts deny" option, which means all hosts can
connect.
ignore errors
The "ignore errors" option tells rsyncd to ignore I/O errors on
the daemon when deciding whether to run the delete phase of the
transfer. Normally rsync skips the --delete step if any I/O
errors have occurred in order to prevent disastrous deletion due
to a temporary resource shortage or other I/O error. In some
cases this test is counter productive so you can use this option
to turn off this behavior.
ignore nonreadable
This tells the rsync daemon to completely ignore files that are
not readable by the user. This is useful for public archives
that may have some non-readable files among the directories, and
the sysadmin doesn't want those files to be seen at all.
transfer logging
The "transfer logging" option enables per-file logging of down-
loads and uploads in a format somewhat similar to that used by
ftp daemons. The daemon always logs the transfer at the end, so
if a transfer is aborted, no mention will be made in the log
file.
If you want to customize the log lines, see the "log format"
option.
log format
The "log format" option allows you to specify the format used
for logging file transfers when transfer logging is enabled.
The format is a text string containing embedded single-character
escape sequences prefixed with a percent (%) character. An
optional numeric field width may also be specified between the
percent and the escape letter (e.g. "%-50n %8l %07p").
The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t
[%p] " is always prefixed when using the "log file" option. (A
perl script that will summarize this default log format is
included in the rsync source code distribution in the "support"
subdirectory: rsyncstats.)
The single-character escapes that are understood are as follows:
o %a the remote IP address
o %b the number of bytes actually transferred
o %B the permission bits of the file (e.g. rwxrwxrwt)
o %c the checksum bytes received for this file (only when
sending)
o %f the filename (long form on sender; no trailing "/")
o %G the gid of the file (decimal) or "DEFAULT"
o %h the remote host name
o %i an itemized list of what is being updated
o %l the length of the file in bytes
o %L the string " -> SYMLINK", " => HARDLINK", or "" (where
SYMLINK or HARDLINK is a filename)
o %m the module name
o %M the last-modified time of the file
o %n the filename (short form; trailing "/" on dir)
o %o the operation, which is "send", "recv", or "del." (the
latter includes the trailing period)
o %p the process ID of this rsync session
o %P the module path
o %t the current date time
o %u the authenticated username or an empty string
o %U the uid of the file (decimal)
For a list of what the characters mean that are output by "%i",
see the --itemize-changes option in the rsync manpage.
Note that some of the logged output changes when talking with
older rsync versions. For instance, deleted files were only
output as verbose messages prior to rsync 2.6.4.
timeout
The "timeout" option allows you to override the clients choice
for I/O timeout for this module. Using this option you can
ensure that rsync won't wait on a dead client forever. The time-
out is specified in seconds. A value of zero means no timeout
and is the default. A good choice for anonymous rsync daemons
may be 600 (giving a 10 minute timeout).
refuse options
The "refuse options" option allows you to specify a space-sepa-
rated list of rsync command line options that will be refused by
your rsync daemon. You may specify the full option name, its
one-letter abbreviation, or a wild-card string that matches mul-
tiple options. For example, this would refuse --checksum (-c)
and all the various delete options:
refuse options = c delete
The reason the above refuses all delete options is that the
options imply --delete, and implied options are refused just
like explicit options. As an additional safety feature, the
refusal of "delete" also refuses remove-sent-files when the dae-
mon is the sender; if you want the latter without the former,
instead refuse "delete-*" -- that refuses all the delete modes
without affecting --remove-sent-files.
When an option is refused, the daemon prints an error message
and exits. To prevent all compression, you can use "dont com-
press = *" (see below) instead of "refuse options = compress" to
avoid returning an error to a client that requests compression.
dont compress
The "dont compress" option allows you to select filenames based
on wildcard patterns that should not be compressed during trans-
fer. Compression is expensive in terms of CPU usage so it is
usually good to not try to compress files that won't compress
well, such as already compressed files.
The "dont compress" option takes a space-separated list of case-
insensitive wildcard patterns. Any source filename matching one
of the patterns will not be compressed during transfer.
The default setting is *.gz *.tgz *.zip *.z *.rpm *.deb *.iso
*.bz2 *.tbz
pre-xfer exec, post-xfer exec
You may specify a command to be run before and/or after the
transfer. If the pre-xfer exec command fails, the transfer is
aborted before it begins.
The following environment variables will be set, though some are
specific to the pre-xfer or the post-xfer environment:
o RSYNC_MODULE_NAME: The name of the module being accessed.
o RSYNC_MODULE_PATH: The path configured for the module.
o RSYNC_HOST_ADDR: The accessing host's IP address.
o RSYNC_HOST_NAME: The accessing host's name.
o RSYNC_USER_NAME: The accessing user's name (empty if no
user).
o RSYNC_REQUEST: (pre-xfer only) The module/path info spec-
ified by the user (note that the user can specify multi-
ple source files, so the request can be something like
"mod/path1 mod/path2", etc.).
o RSYNC_ARG#: (pre-xfer only) The pre-request arguments are
set in these numbered values. RSYNC_ARG0 is always
"rsyncd", and the last value contains a single period.
o RSYNC_EXIT_STATUS: (post-xfer only) rsync's exit value.
This will be 0 for a successful run, a positive value for
an error that rsync returned (e.g. 23=partial xfer), or a
-1 if rsync failed to exit properly.
o RSYNC_RAW_STATUS: (post-xfer only) the raw exit value
from waitpid().
Even though the commands can be associated with a particular
module, they are run using the permissions of the user that
started the daemon (not the module's uid/gid setting) without
any chroot restrictions.
AUTHENTICATION STRENGTH
The authentication protocol used in rsync is a 128 bit MD4 based chal-
lenge response system. This is fairly weak protection, though (with at
least one brute-force hash-finding algorithm publicly available), so if
you want really top-quality security, then I recommend that you run
rsync over ssh. (Yes, a future version of rsync will switch over to a
stronger hashing method.)
Also note that the rsync daemon protocol does not currently provide any
encryption of the data that is transferred over the connection. Only
authentication is provided. Use ssh as the transport if you want
encryption.
Future versions of rsync may support SSL for better authentication and
encryption, but that is still being investigated.
EXAMPLES
A simple rsyncd.conf file that allow anonymous rsync to a ftp area at
/home/ftp would be:
[ftp]
path = /home/ftp
comment = ftp export area
A more sophisticated example would be:
uid = nobody
gid = nobody
use chroot = no
max connections = 4
syslog facility = local5
pid file = /var/run/rsyncd.pid
slp refresh = 3600
[ftp]
path = /var/ftp/pub
comment = whole ftp area (approx 6.1 GB)
[sambaftp]
path = /var/ftp/pub/samba
comment = Samba ftp area (approx 300 MB)
[rsyncftp]
path = /var/ftp/pub/rsync
comment = rsync ftp area (approx 6 MB)
[sambawww]
path = /public_html/samba
comment = Samba WWW pages (approx 240 MB)
[cvs]
path = /data/cvs
comment = CVS repository (requires authentication)
auth users = tridge, susan
secrets file = /etc/rsyncd.secrets
The /etc/rsyncd.secrets file would look something like this:
tridge:mypass
susan:herpass
FILES
/etc/rsyncd.conf or rsyncd.conf
SEE ALSO
rsync(1)
DIAGNOSTICS
BUGS
Please report bugs! The rsync bug tracking system is online at
http://rsync.samba.org/
VERSION
This man page is current for version 2.6.8 of rsync.
CREDITS
rsync is distributed under the GNU public license. See the file COPY-
ING for details.
The primary ftp site for rsync is ftp://rsync.samba.org/pub/rsync.
A WEB site is available at http://rsync.samba.org/
We would be delighted to hear from you if you like this program.
This program uses the zlib compression library written by Jean-loup
Gailly and Mark Adler.
THANKS
Thanks to Warren Stanley for his original idea and patch for the rsync
daemon. Thanks to Karsten Thygesen for his many suggestions and docu-
mentation!
AUTHOR
rsync was written by Andrew Tridgell and Paul Mackerras. Many people
have later contributed to it.
Mailing lists for support and development are available at
http://lists.samba.org
22 Apr 2006 rsyncd.conf(5)
Man(1) output converted with
man2html and wrapped by fishsponge
This page was generated on Sat Sep 8 16:39:58 GMT 2007
|
Your favourite pages:
No pages logged yet.
Trying to save cookie... Top 10 most popular pages:
svn man page (6167 hits)
(FreeBSD 6.2)
sqlite3 man page (5598 hits)
(openSUSE 10.2)
adv_cap_autoneg man page (5045 hits)
(Solaris 10 11_06)
CPAN man page (4791 hits)
(Suse Linux 10.1)
ssh man page (4439 hits)
(Suse Linux 10.1)
ssh-socks5-proxy-connect man page (3525 hits)
(Solaris 10 11_06)
signal man page (3395 hits)
(Suse Linux 10.1)
netcat man page (3385 hits)
(Suse Linux 10.1)
pprosetup man page (2893 hits)
(Solaris 10 11_06)
startproc man page (2740 hits)
(Suse Linux 10.1)
|
Man Pages 
