|
Hopefully, this page is exactly what you are looking for, but if not, you can always find further assistance on Unix/Linux Forum!
foo2oak-wrapper(1) foo2oak-wrapper(1)
NAME
foo2oak-wrapper - Convert Postscript into an OAKT printer stream
SYNOPSIS
foo2oak-wrapper [options] [ps-file]
DESCRIPTION
foo2oak-wrapper is a Foomatic compatible printer wrapper for the
foo2oak printer driver. This script reads a Postscript ps-file or
standard input and converts it to Oak Technology OAKT printer format
for driving the HP Color LaserJet 1500 laser printer and other OAKT-
based printers.
This script can be used in a standalone fashion, but is intended to be
called from a printer spooler system which uses the Foomatic printer
database.
COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a print job that
are usually controlled on a per job basis.
-b bits
Number of bits per plane (1 or 2) [1].
-c Print in color (else monochrome).
-m media
Media code to send to printer [1].
| |
| 1 standard | 259 letterhead
| 2 transparency | 261 thickstock
| 3 glossy | 262 postcard
|257 envelope | 263 labels
-p paper
Paper size code to send to printer [1].
| |
|1 letter | 9 A4
|5 legal | 11 A5
|7 executive | 13 B5
-n copies
Number of copies [1].
-r xresxyres
Set device resolution in pixels/inch [600x600].
-s source
Source (Input Slot) code to send to printer [7].
| |
|1 upper | 4 manual
|7 auto |
-2 Print in 2-up. Requires the psutils package.
-4 Print in 4-up. Requires the psutils package.
Printer Tweaking Options
These are the options used to customize the operation of foo2oak for a
particular printer.
-u xoffxyoff
Set the offset of the start of the printable region from the
upper left corner, in pixels [varies with paper size]. The
defaults should work on the 2200DL and 2300DL, and have not been
tested on any other printers.
-l xoffxyoff
Set the offset of the end of the printable region from the lower
right corner, in pixels [varies with paper size]. The defaults
should work on the 2200DL and 2300DL, and have not been tested
on any other printers.
-L mask
Send the logical clipping values from -u/-l in the OAKT stream.
foo2oak-wrapper always runs Ghostscript with the ideal page
dimensions, so that the scale of the image is correct, regard-
less whether or not the printer has unprintable regions. This
option is used to move the position of the clipped image back to
where it belongs on the page. The default is to send the amount
which was clipped by -u and -l, and should be good in most
cases.
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts
Color Tweaking Options
These are the options used to control the quality of color output.
Color correction is currently a WORK IN PROGRESS.
-g gsopts
Additional options to pass to Ghostscript, such as
-g“-dDITHERPPI=nnn”, etc. This option may appear more than
once.
-G profile.icm
Convert profile.icm to a Postscript color rendering dictionary
(CRD) using foo2zjs-icc2ps and adjust the printer colors by
using the Postscript setcolorrendering operator. (WORK IN
PROGRESS).
-G gamma-file.ps
Prepend gamma-file.ps to the Postscript input to perform color
correction using the setcolortransfer Postscript operator. For
example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
Debugging Options
These options are used for debugging foo2oak and its wrapper.
-S plane
Output just a single color plane from a color print and print it
on the black plane. The default is to output all color planes.
1 Cyan
2 Magenta
3 Yellow
4 Black
-D level
Set Debug level [0].
EXAMPLES
Create a monochrome OAKT stream from a Postscript document, examine it,
and then print it using a RAW print queue:
foo2oak-wrapper testpage.ps > testpage.oak
oakdecode < testpage.oak
lpr -P raw testpage.oak
Create a color OAKT stream from a Postscript document:
foo2oak-wrapper -c testpage.ps > testpage.oak
FILES
/usr/bin/foo2oak-wrapper
SEE ALSO
foo2oak(1), oak(1)
AUTHOR
Rick Richardson <rickr@mn.rr.com>
http://foo2oak.rkkda.com/
Man(1) output converted with
man2html and wrapped by fishsponge
This page was generated on Tue Feb 13 02:16:09 GMT 2007
|
Your favourite pages:
No pages logged yet.
Trying to save cookie... Top 10 most popular pages:
CPAN man page (4290 hits)
(Suse Linux 10.1)
ssh man page (4160 hits)
(Suse Linux 10.1)
adv_cap_autoneg man page (3471 hits)
(Solaris 10 11_06)
sqlite3 man page (3371 hits)
(openSUSE 10.2)
svn man page (3036 hits)
(FreeBSD 6.2)
startproc man page (1856 hits)
(Suse Linux 10.1)
pprosetup man page (1576 hits)
(Solaris 10 11_06)
signal man page (1541 hits)
(Suse Linux 10.1)
netcat man page (1508 hits)
(Suse Linux 10.1)
ssh-socks5-proxy-connect man page (1450 hits)
(Solaris 10 11_06)
|
Man Pages 
