|
Hopefully, this page is exactly what you are looking for, but if not, you can always find further assistance on Unix/Linux Forum!
System Administration Commands in.rlogind(1M)
NAME
in.rlogind, rlogind - remote login server
SYNOPSIS
/usr/sbin/in.rlogind [-k5eExXciPp] [-s tos] [-S keytab] [-M
realm]
DESCRIPTION
in.rlogind is the server for the rlogin(1) program. The
server provides a remote login facility with authentication
based on Kerberos V5 or privileged port numbers.
in.rlogind is invoked by inetd(1M) when a remote login con-
nection is established. When Kerberos V5 authentication is
required (see option -k below), the authentication sequence
is as follows:
o Check Kerberos V5 authentication.
o Check authorization according to the rules in
krb5_auth_rules(5).
o Prompt for a password if any checks fail and
/etc/pam.conf is configured to do so.
In order for Kerberos authentication to work, a host/<FQDN>
Kerberos principal must exist for each Fully Qualified
Domain Name associated with the in.rlogind server. Each of
these host/<FQDN> principals must have a keytab entry in the
/etc/krb5/krb5.keytab file on the in.rlogind server. An
example principal might be:
host/bigmachine.eng.example.com
See kadmin(1M) or gkadmin(1M) for instructions on adding a
principal to a krb5.keytab file. See System Administration
Guide: Security Services for a discussion of Kerberos
authentication.
If Kerberos V5 authentication is not enabled, then the
authentication procedure follows the standard rlogin proto-
col:
o The server checks the client's source port. If the port
is not in the range 512-1023, the server aborts the
connection.
o The server checks the client's source address. If an
entry for the client exists in both /etc/hosts and
/etc/hosts.equiv, a user logging in from the client is
SunOS 5.10 Last change: 10 Nov 2005 1
System Administration Commands in.rlogind(1M)
not prompted for a password. If the address is associ-
ated with a host for which no corresponding entry
exists in /etc/hosts, the user is prompted for a pass-
word, regardless of whether or not an entry for the
client is present in /etc/hosts.equiv. See hosts(4)
and hosts.equiv(4).
Once the source port and address have been checked,
in.rlogind allocates a pseudo-terminal and manipulates file
descriptors so that the slave half of the pseudo-terminal
becomes the stdin, stdout, and stderr for a login process.
The login process is an instance of the login(1) program,
invoked with the -r.
The login process then proceeds with the pam(3PAM) authenti-
cation process. See SECURITY below. If automatic authenti-
cation fails, it reprompts the user to login.
The parent of the login process manipulates the master side
of the pseudo-terminal, operating as an intermediary between
the login process and the client instance of the rlogin pro-
gram. In normal operation, a packet protocol is invoked to
provide <Ctrl-S> and <Ctrl-Q> type facilities and propagate
interrupt signals to the remote programs. The login process
propagates the client terminal's baud rate and terminal
type, as found in the environment variable, TERM.
OPTIONS
The following options are supported:
-5 Same as -k, for backwards compatibility.
-c Requires Kerberos V5 clients to present a
cryptographic checksum of initial connection
information like the name of the user that
the client is trying to access in the ini-
tial authenticator. This checksum provides
additionl security by preventing an attacker
from changing the initial connection infor-
mation. This option is mutually exclusive
with the -i option.
-e Creates an encrypted session.
SunOS 5.10 Last change: 10 Nov 2005 2
System Administration Commands in.rlogind(1M)
-E Same as -e, for backwards compatibility.
-i Ignores authenticator checksums if provided.
This option ignores authenticator checksums
presented by current Kerberos clients to
protect initial connection information.
Option -i is the opposite of option -c.
-k Allows Kerberos V5 authentication with the
.k5login access control file to be trusted.
If this authentication system is used by the
client and the authorization check is
passed, then the user is allowed to log in.
-M realm Uses the indicated Kerberos V5 realm. By
default, the daemon will determine its realm
from the settings in the krb5.conf(4) file.
-p Prompts for authentication only if other
authentication checks fail.
-P Prompts for a password in addition to other
authentication methods.
-s tos Sets the IP TOS option.
-S keytab Sets the KRB5 keytab file to use.
The/etc/krb5/krb5.keytab file is used by
default.
-x Same as -e, for backwards compatibility.
-X Same as -e, for backwards compatibility.
SunOS 5.10 Last change: 10 Nov 2005 3
System Administration Commands in.rlogind(1M)
USAGE
rlogind and in.rlogind are IPv6-enabled. See ip6(7P). IPv6
is not currently supported with Kerberos V5 authentication.
Typically, Kerberized rlogin service runs on port 543 (klo-
gin) and Kerberized, encrypted rlogin service runs on port
2105 (eklogin). The corresponding FMRI entries are:
svc:/network/login:klogin (rlogin with kerberos)
svc:/network/login:eklogin (rlogin with kerberos and encryption)
SECURITY
in.rlogind uses pam(3PAM) for authentication, account
management, and session management. The PAM configuration
policy, listed through /etc/pam.conf, specifies the modules
to be used for in.rlogind. Here is a partial pam.conf file
with entries for the rlogin command using the "rhosts" and
UNIX authentication modules, and the UNIX account, session
management, and password management modules.
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth required pam_unix_auth.so.1
rlogin account required pam_unix_roles.so.1
rlogin account required pam_unix_projects.so.1
rlogin account required pam_unix_account.so.1
rlogin session required pam_unix_session.so.1
With this configuration, the server checks the client's
source address. If an entry for the client exists in both
/etc/hosts and /etc/hosts.equiv, a user logging in from the
client is not prompted for a password. If the address is
associated with a host for which no corresponding entry
exists in /etc/hosts, the user is prompted for a password,
regardless of whether or not an entry for the client is
present in /etc/hosts.equiv. See hosts(4) and
hosts.equiv(4).
When running a Kerberized rlogin service (with or without
the encryption option), the pam service name that should be
used is "krlogin".
If there are no entries for the rlogin service, then the
entries for the "other" service will be used. If multiple
authentication modules are listed, then the user may be
prompted for multiple passwords. Removing the
pam_rhosts_auth.so.1 entry will disable the /etc/hosts.equiv
and ~/.rhosts authentication protocol and the user would
SunOS 5.10 Last change: 10 Nov 2005 4
System Administration Commands in.rlogind(1M)
always be forced to type the password. The sufficient flag
indicates that authentication through the
pam_rhosts_auth.so.1 module is sufficient to authenticate
the user. Only if this authentication fails is the next
authentication module used.
ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWrcmds |
|_____________________________|_____________________________|
SEE ALSO
login(1), svcs(1), rlogin(1), gkadmin(1M), in.rshd(1M),
inetadm(1M), inetd(1M), kadmin(1M), svcadm(1M), pam(3PAM),
hosts(4), hosts.equiv(4), krb5.conf(4), pam.conf(4), attri-
butes(5), environ(5), krb5_auth_rules(5),
pam_authtok_check(5), pam_authtok_get(5),
pam_authtok_store(5), pam_dhkeys(5), pam_passwd_auth(5),
pam_unix_account(5), pam_unix_auth(5), pam_unix_session(5),
smf(5)
System Administration Guide: Security Services
DIAGNOSTICS
All diagnostic messages are returned on the connection asso-
ciated with the stderr, after which any network connections
are closed. An error is indicated by a leading byte with a
value of 1.
Hostname for your address unknown. No entry in the host
name database
existed for the
client's machine.
Try again. A fork by the server
failed.
/usr/bin/sh: ... The user's login
shell could not be
started.
SunOS 5.10 Last change: 10 Nov 2005 5
System Administration Commands in.rlogind(1M)
NOTES
The authentication procedure used here assumes the integrity
of each client machine and the connecting medium. This is
insecure, but it is useful in an ``open'' environment.
A facility to allow all data exchanges to be encrypted
should be present.
The pam_unix(5) module is no longer supported. Similar func-
tionality is provided by pam_authtok_check(5),
pam_authtok_get(5), pam_authtok_store(5), pam_dhkeys(5),
pam_passwd_auth(5), pam_unix_account(5), pam_unix_auth(5),
and pam_unix_session(5).
The in.rlogind service is managed by the service management
facility, smf(5), under the service identifier:
svc:/network/login:rlogin (rlogin)
svc:/network/login:klogin (rlogin with kerberos)
svc:/network/login:eklogin (rlogin with kerberos and encryption)
Administrative actions on this service, such as enabling,
disabling, or requesting restart, can be performed using
svcadm(1M). Responsibility for initiating and restarting
this service is delegated to inetd(1M). Use inetadm(1M) to
make configuration changes and to view configuration infor-
mation for this service. The service's status can be queried
using the svcs(1) command.
SunOS 5.10 Last change: 10 Nov 2005 6
Man(1) output converted with
man2html and wrapped by fishsponge
This page was generated on Wed Sep 12 21:37:13 GMT 2007
|
Your favourite pages:
No pages logged yet... Top 10 most popular pages:
prstat man page (24547 hits)
(Solaris 10 11_06)
netcat man page (17695 hits)
(Suse Linux 10.1)
ssh-socks5-proxy-connect man page (13536 hits)
(Solaris 10 11_06)
signal man page (12551 hits)
(Suse Linux 10.1)
startproc man page (11991 hits)
(Suse Linux 10.1)
raidctl man page (11358 hits)
(Solaris 10 11_06)
adv_cap_autoneg man page (10288 hits)
(Solaris 10 11_06)
sqlite3 man page (9729 hits)
(openSUSE 10.2)
CPAN man page (8947 hits)
(Suse Linux 10.1)
BusyBox man page (7702 hits)
(Suse Linux 10.1)
|
Man Pages 
