|
Hopefully, this page is exactly what you are looking for, but if not, you can always find further assistance on Unix/Linux Forum!
System Administration Commands smpatch(1M)
NAME
smpatch - download, apply, and remove updates
SYNOPSIS
/usr/sbin/smpatch add -i update-id [auth-opts] [-i update-
id] ... [-d update-dir] [-n system-name] ... [-x
mlist=system-list-file]
/usr/sbin/smpatch add -x idlist=update-list-file [auth-opts]
[-d update-dir] [-n system-name] ... [-x mlist=system-list-
file]
/usr/sbin/smpatch analyze [auth-opts] [-i update-id] ... [-n
system-name] ... [-x idlist=update-list-file]
/usr/sbin/smpatch download [auth-opts] [-i update-id] ...
[-d update-dir] [-f] [-n system-name] ... [-t] [-x
idlist=update-list-file]
/usr/sbin/smpatch get [auth-opts] [-n system-name] ...
[parameter-name...]
/usr/sbin/smpatch order -i update-id [auth-opts] [-i
update-id] ... [-d update-dir] [-n system-name] ...
/usr/sbin/smpatch order -x idlist=update-list-file [auth-
opts] [-d update-dir] [-n system-name] ...
/usr/sbin/smpatch remove -i update-id [auth-opts] [-n
system-name] ...
/usr/sbin/smpatch set [auth-opts] [-n system-name] ...
parameter-name=parameter-value...
/usr/sbin/smpatch unset [auth-opts] [-n system-name] ...
parameter-name...
/usr/sbin/smpatch update [auth-opts] [-i update-id] ... [-d
update-dir] [-n system-name] ... [-x idlist=update-list-
file]
DESCRIPTION
The smpatch command manages the update process on a single
system or on multiple systems. Use this command to download,
apply, and remove updates. Also, use the smpatch command to
configure the update management environment for your system.
If you want to run the smpatch command in remote mode, your
system must run at least the Developer Solaris Software
Group of the Solaris 10 system.
SunOS 5.10 Last change: 1 Dec 2005 1
System Administration Commands smpatch(1M)
The smpatch analyze command determines the updates that are
appropriate for the systems you want to update. The smpatch
command can download and apply updates that you specify on
the command line. Or, smpatch can download and apply updates
based on an analysis of one or more systems. Use the -i
option or the -x idlist= option to specify the particular
updates.
All of the systems on which you want to apply updates must
be running the same version of the Solaris Operating System,
have the same hardware architecture, and have the same
updates applied.
The list of updates that is generated by the analysis is
based on all of the available updates from the Sun update
server. No explicit information about your host system or
its network configuration is transmitted to Sun. Only a
request for the Sun update set is transmitted. The update
set is scanned for updates that are appropriate for this
host system, the results are displayed, and those updates
are optionally downloaded.
The smpatch command supports the following subcommands:
add
Applies one or more updates to one or more systems. You
must specify at least one update to apply. By default,
updates are applied to the local system.
This subcommand attempts to apply only the updates you
specify. If you specify an update that depends on
another that has not been applied, the add command fails
to apply the update you specified.
This subcommand does not apply updates based on the
specified update policy. To apply updates based on the
update policy, use the update subcommand.
Use the -i or -x idlist= option to specify the updates
to apply. Note that all of the updates you specify, and
those on which they depend, must exist in the download
directory.
Use the -n or the -x mlist= option to specify the sys-
tems on which to apply updates.
Optionally use the -d option to specify an alternate
download directory.
If the updates on which the specified updates depend are
unavailable, run the smpatch download subcommand to
SunOS 5.10 Last change: 1 Dec 2005 2
System Administration Commands smpatch(1M)
obtain the updates you need.
analyze
Analyzes a system to generate a list of the appropriate
updates.
After analyzing the system, use the update subcommand or
the download and add subcommands to download and apply
the updates to your systems.
The list of updates is written to standard output, so
you can redirect standard output to a file to create an
update list.
If you supply a list of one or more updates, the list is
augmented with the updates on which those updates
depend. The list is also put in an order suitable for
applying updates.
The smpatch analyze command depends on network services
that are not available while the system is in single-
user mode.
download
Downloads updates from the Sun update server to a sys-
tem. You can optionally specify which updates to down-
load. You can also specify the name of a system and
download the appropriate updates to that system.
Use the -i or -x idlist= option to specify the updates
to download.
Use the -f option to force the download of the exact
update revision specified by -i update-id. If -i
update-id does not specify a revision, the highest revi-
sion of the update is downloaded.
Use the -t option to download the README file for the
update specified by -i update-id. If -i update-id does
not specify a revision, the README file for the highest
revision of the update is downloaded.
Use the -n option to analyze a remote system and to
determine which updates to download. The updates, and
those on which they depend, are downloaded from the Sun
update server to the download directory of the system
SunOS 5.10 Last change: 1 Dec 2005 3
System Administration Commands smpatch(1M)
you specified.
The smpatch download command depends on network services
that are not available while the system is in single-
user mode.
get
Lists one or more of the smpatch configuration parameter
values. See ``Configuring Your Update Management
Environment.''
To see values for all parameters, run the smpatch get
command with no arguments. The output shows an entry for
all configuration parameters. Each entry appears on a
line by itself. Each entry includes three fields: the
parameter name, the value you have assigned it, and its
default value. The fields are separated by one or more
tab characters.
The following values have special meaning: - means that
no value is set, "" means that the value is the null
string, \- means that the value is -, and \"" means that
the value is "" (two double quotes).
In addition to these special values, these special char-
acters might appear in the output: \t for a tab, \n for
a newline, and \\ for a backslash.
To see values for particular parameters, run the smpatch
get command with one or more parameter names. The output
lists one parameter value per line in the order in which
the parameter names are specified on the command line.
order
Sorts a list of updates into an order that can be used
to apply updates.
The list of updates is written to standard output, so
you can redirect standard output to a file to create an
update list.
Use the -i or -x idlist= option to specify the updates
to order. Note that all of the updates you specify must
exist in the download directory.
SunOS 5.10 Last change: 1 Dec 2005 4
System Administration Commands smpatch(1M)
remove
Removes a single update from a single system.
Use the -i option to specify which update to remove. Do
not use the -x idlist= option. Optionally, use the -n
option to specify the name of a system. Do not use the
-x mlist= option. By default, the update is removed from
the local system.
If the update that you want to remove is required by one
or more of the updates that have already been applied to
the system, the update is not removed.
set
Sets the values of one or more configuration parameters.
Nothing is written to standard output or standard error
when you set parameters, even if a parameter value you
set is invalid. This command does not validate the
values you set.
unset
Resets one or more configuration parameters to the
default values. You must specify at least one configura-
tion parameter.
update
Updates a single local or remote system by applying
appropriate updates. This subcommand analyzes the sys-
tem, then downloads the appropriate updates from the Sun
update server to your system. After the availability of
the updates has been confirmed, the updates are applied
based on the update policy.
By default, standard updates and those that have reboo-
tafter or reconfigafter properties are applied.
If an update does not meet the policy for applying
updates, the update is not applied. Instead, the ID of
the update is written to a file in the download direc-
tory. After the update ID is written to the file,
smpatch continues to apply the other updates. Later, you
can use patchadd to manually apply any updates listed in
SunOS 5.10 Last change: 1 Dec 2005 5
System Administration Commands smpatch(1M)
this file. The updates listed in the file are still in
the download directory.
Installation instructions for updates that require spe-
cial handling are included in the README file for each
update.
The smpatch update command depends on network services
that are not available while the system is in single-
user mode.
Using Local Mode or Remote Mode
Starting with Solaris 9, the smpatch command is available in
two modes: local mode and remote mode. Local mode can be run
only on the local system and can be run by users who have
the appropriate authorizations. This mode can be run while
the system is in single-user mode. Remote mode can be used
to perform tasks on remote systems and can be run by users
or roles that have the appropriate authorizations.
By default, local mode is run. In local mode, the Solaris
WBEM services are not used, and none of the authentication
options or those options that refer to remote systems are
available. The command in local mode runs faster than in
remote mode.
If the Solaris WBEM services are running and you specify any
of the remote or authentication options, the command in
remote mode is used.
On Solaris 8 systems, the smpatch command only supports
local mode operations.
Specifying the Source of Updates
Your system must specify the source of updates to use. By
default, you obtain updates from the Sun update server. How-
ever, you can also obtain updates from an update server on
your intranet or from a local collection of updates on your
system.
You must specify the URL that points to the collection of
updates. By default, the Sun update server is the source of
updates. The URL is:
https://getupdates.sun.com/solaris/
The URL must point to an update server or to a collection of
updates that is available to the local system. The value of
this URL cannot be null.
SunOS 5.10 Last change: 1 Dec 2005 6
System Administration Commands smpatch(1M)
Configuring Your Update Management Environment
You can use the smpatch set command to configure the update
management environment for your system. Use these parame-
ters:
patchpro.patchset
Name of the update set to use. The default name is
current.
patchpro.download.directory
Path of the directory where downloaded updates are
stored and from which updates are applied. The default
location is /var/sadm/spool.
patchpro.backout.directory
Path of the directory where update backout data is
saved. When an update is removed, the data is retrieved
from this directory as well. By default, backout data is
saved in the package directories.
patchpro.patch.source
URL that points to the collection of updates. The
default URL is that of the Sun update server,
https://getupdates.sun.com/solaris/.
patchpro.proxy.host
Host name of your web proxy. By default, no web proxy is
specified, and a direct connection to the Internet is
assumed.
patchpro.proxy.port
Port number used by your web proxy. By default, no web
proxy is specified, and a direct connection to the
Internet is assumed. The default port is 8080.
SunOS 5.10 Last change: 1 Dec 2005 7
System Administration Commands smpatch(1M)
patchpro.proxy.user
Your user name used by your web proxy for authentica-
tion.
patchpro.proxy.passwd
Password used by your web proxy for authentication.
patchpro.install.types
Your policy for applying updates. The value is a list of
zero or more colon-separated update properties that are
permitted to be applied by an update operation (smpatch
update).
This policy only affects which updates are installed on
your system. The policy does not affect which updates
are downloaded.
By default, updates that have the standard, rebootafter,
and reconfigafter properties can be applied. See ``Set-
ting an Update Policy.''
Setting an Update Policy
Updates are classified as being standard or nonstandard. A
standard update can be applied by smpatch update. Such an
update is associated with the standard update property.
smpatch applies standard updates immediately. These updates
require no system restart. A nonstandard update has one of
the following characteristics:
o An update that is associated with the rebootafter,
rebootimmediate, reconfigafter, reconfigimmediate, or
singleuser properties. Such a nonstandard update can be
applied automatically during a system shutdown if per-
mitted by the policy.
o An update that is associated with the interactive pro-
perty. Such an update cannot be applied by using
automated installation mechanisms like smpatch update.
When you attempt to apply one of these updates using
smpatch update, the update will be downloaded but not
installed. You must examine the update's README file
and perform whatever manual steps it describes. Typi-
cally, you are instructed to apply the update manually
SunOS 5.10 Last change: 1 Dec 2005 8
System Administration Commands smpatch(1M)
using patchadd or smpatch add.
Use smpatch set to specify the types of updates that smpatch
can additionally apply during an update operation. Such
updates might include those that require a reboot and those
that must be applied while the system is in single-user
mode.
This policy only affects which updates are installed on your
system. The policy does not affect which updates are down-
loaded.
Specify the types of updates that can be applied by using
the following command:
# smpatch set patchpro.install.types=update-property-list
update-property-list is a colon-separated list of one or
more of the following update properties:
interactive
An update that cannot be applied by running the usual
update management tools (pprosvc, smpatch, or patchadd).
Before this update is applied, the user must perform
special actions. Such actions might include checking the
serial number of a disk drive, stopping a critical dae-
mon, or reading the update's README file.
rebootafter
The effects of this update are not visible until after
the system is rebooted.
rebootimmediate
When this update is applied, the system becomes unstable
until the system is rebooted. An unstable system is one
in which the behavior is unpredictable and data might be
lost.
reconfigafter
The effects of this update are not visible until after a
reconfiguration reboot (boot -r). See the boot(1M) man
SunOS 5.10 Last change: 1 Dec 2005 9
System Administration Commands smpatch(1M)
page.
reconfigimmediate
When this update is applied, the system becomes unstable
until the system gets a reconfiguration reboot (boot
-r). An unstable system is one in which the behavior is
unpredictable and data might be lost.
singleuser
Do not apply this update while the system is in mul-
tiuser mode. You must apply this update on a quiet sys-
tem with no network traffic and with extremely res-
tricted I/O activity.
standard
This update can be applied while the system is in mul-
tiuser mode. The effects of the update are visible as
soon as it is applied unless the application being
updated is running while the update is applied. In this
case, the effects of the update are visible after the
affected application is restarted.
OPTIONS
The smpatch command supports two kinds of options: authenti-
cation options and subcommand options.
Authentication Options
The smpatch authentication options, auth-opts, apply to all
of the subcommands.
If no authentication options are specified, certain defaults
are assumed and the user might be prompted for additional
information, such as a password for authentication purposes.
These authentication options are only available if the
Solaris Management Console and the Solaris WBEM services are
available on the local system. If the WBEM services are not
running on the local system, smpatch performs update opera-
tions on the local system only. You can also ``force'' the
use of the local-mode smpatch command by using the -L
option.
SunOS 5.10 Last change: 1 Dec 2005 10
System Administration Commands smpatch(1M)
The single letter options can also be specified by their
equivalent option words preceded by two hyphens. For exam-
ple, you can specify either -l or --rolepassword.
The following authentication options are supported:
-H | --hostname host-name:port
Specifies the host and port to which you want to con-
nect. If you do not specify a port, the system connects
to the default port, 898. If you do not specify a host
(host-name:port), the Solaris Management Console con-
nects to the local host on port 898. You might still
have to choose a toolbox to load into the console. To
override this behavior, use the smc -B command, or set
your console preferences to load a home toolbox by
default.
-L
Forces the smpatch command to use local mode, which does
not rely on Solaris WBEM services. On Solaris 8 systems,
this option does not do anything.
This option is mutually exclusive with the other authen-
tication options.
-l | --rolepassword role-password
Specifies the password for role-name. If you specify
role-name but do not specify role-password, you are
prompted to supply role-password. Because passwords
specified on the command line can be seen by any user on
the system, this option is considered to be insecure.
-p | --password password
Specifies the password for user-name. If you do not
specify a password, you are prompted to supply one.
Because passwords specified on the command line can be
seen by any user on the system, this option is con-
sidered to be insecure.
SunOS 5.10 Last change: 1 Dec 2005 11
System Administration Commands smpatch(1M)
-r | --rolename role-name
Specifies a role name for authentication. If this option
is not specified, no role is assumed.
-u | --username user-name
Specifies the user name for authentication. If you do
not specify this option, the user identity running the
console process is assumed.
Subcommand Options
The following options pertain to the smpatch subcommands:
-d update-dir
Specifies an alternate download directory in which
updates are downloaded and from which they are applied.
The default download directory is /var/sadm/spool.
The directory must be writable by root and be publicly
readable.
update-dir uses one of the following forms:
o For remote mode, specify host-name:/update-dir,
where /update-dir is a fully qualified, shared
directory.
o For local mode, specify /update-dir, which is a
fully qualified, shared directory.
This option is supported by the add, download, order,
and update subcommands.
-f
Forces the download of the exact update revision speci-
fied by -i update-id. If -i update-id does not specify a
revision, the highest revision of the update is down-
loaded.
This option is supported by the download subcommand.
SunOS 5.10 Last change: 1 Dec 2005 12
System Administration Commands smpatch(1M)
-h
Displays information about the command-line options for
the specified subcommand. This option is mutually
exclusive with all other options.
-i update-id
Specifies the ID of an update.
You can specify more than one update ID by using the -i
option for each update. You can also use the -x idlist=
option to point to a list of update IDs.
When using the remove subcommand, you can specify
exactly one update ID.
This option is supported by the add, analyze, download,
order, remove, and update subcommands.
-n system-name
Specifies the name of the system on which to manage
updates.
When using the add subcommand, you can specify more than
one system by using the -n option for each system. When
using the analyze, download, remove, and update subcom-
mands, you can only specify a single system.
To specify more than one system for the smpatch add com-
mand, use the -x mlist= option. This option enables you
to specify a list of systems instead of using the -n
option to specify each system. The -n option and the -x
mlist= option are mutually exclusive.
If you do not specify this option, the system is assumed
to be the one specified by the -H option.
This option is supported only if the Solaris Management
Console and the Solaris WBEM services are running on the
local system and any system that is specified by this
option.
This option is supported by the add, analyze, download,
get, order, remove, set, unset, and update subcommands.
SunOS 5.10 Last change: 1 Dec 2005 13
System Administration Commands smpatch(1M)
-t
Downloads the README file associated with the update
specified by -i update-id. If -i update-id does not
specify a revision, the README file for the highest
revision of the update is downloaded.
This option is supported by the download subcommand.
-x idlist=update-list-file
Specifies the name of a file, update-list-file, that
contains a list of updates to download or apply.
Each update ID in the file must be terminated by a new-
line character. The file name you specify must be a full
path name.
You can use the -i option to specify a list of update
IDs.
This option is supported by the add, analyze, download,
order, and update subcommands.
-x mlist=system-list-file
Specifies the name of a file, system-list-file, that
contains a list of systems on which to manage updates.
Each system name must be terminated by a newline charac-
ter. The file name you specify must be a full path name.
You can use the -n option to specify a list of systems
instead of using the -x mlist= option. The -n option and
the -x mlist= option are mutually exclusive.
This option is supported only if the Solaris Management
Console and the Solaris WBEM services are running on the
local system and any system that is specified in
system-list-file.
This option is supported by the add subcommand.
EXAMPLES
Example 1: Analyzing Your System to Obtain the List of
Appropriate Updates for the Local System
SunOS 5.10 Last change: 1 Dec 2005 14
System Administration Commands smpatch(1M)
# smpatch analyze
Shows how to analyze your system to obtain the list of
appropriate updates. After the analysis, you can download
and apply the updates to your system.
Example 2: Analyzing Your System to Obtain the List of
Appropriate Updates for Another System
# smpatch analyze -n lab1
Shows how to analyze a different system, lab1, to obtain the
list of appropriate updates. After the analysis, you can
download and apply the updates to that system.
Example 3: Applying Updates to Multiple Systems
# smpatch add -i 102893-01 -i 106895-09 -i 106527-05 \
-d fileserver:/files/updates/s10 -n lab1 -n lab2
Applies updates 102893-01, 106895-09, and 106527-05 to the
systems lab1 and lab2. The updates are located in the
/files/updates/s10 directory on the system named fileserver.
Example 4: Applying Updates by Using an Update List File
# smpatch add -x idlist=/tmp/update/update_file \
-d /net/fileserver/export/updatespool/Solaris10 -n lab1 -n lab2
Applies the updates specified in the file
/tmp/update/update_file to the systems lab1 and lab2. The
updates are located in the NFS-mounted directory named
/net/fileserver/export/updatespool/Solaris10.
Example 5: Applying Updates by Using an Update List File and
a System List File
# smpatch add -x idlist=/tmp/update/update_file \
-x mlist=/tmp/update/sys_file
Applies the updates listed in the file
/tmp/update/update_file to the systems listed in the file
/tmp/update/sys_file. The updates are located in the default
/var/sadm/spool directory on the local system.
Example 6: Analyzing a System and Downloading Updates From
the Sun Update Server
# smpatch download -n lab1
Analyzes the lab1 system and downloads the appropriate
updates from the Sun update server to the download
SunOS 5.10 Last change: 1 Dec 2005 15
System Administration Commands smpatch(1M)
directory.
Example 7: Downloading Updates From the Sun Update Server
The command below downloads the 102893-01 and 106895-09
updates from the Sun update server to the /files/updates/s10
directory.
# smpatch download -i 102893-01 -i 106895-09 -d /files/updates/s10
Example 8: Downloading Specific Update Revisions From the
Sun Update Server
The command below downloads the 102893-01 and 106895-02
updates from the Sun update server. The specific revisions
are downloaded, not the highest available revision.
# smpatch download -f -i 102893-01 -i 106895-02
Example 9: Downloading the Highest Available Update Revi-
sions From the Sun Update Server
The command below downloads the 102893-01 and 106895-09
updates, which are the highest available revisions, from the
Sun update server.
# smpatch download -f -i 102893 -i 106895
Example 10: Downloading Update README Files From the Sun
Update Server
The command below downloads the README files for updates
102893-01 and 106895-02. Because update 102893 was specifi
ed without a revision number, the README file for the
highest available update revision, 102893-01, is downloaded
from the Sun update server.
# smpatch download -t -i 102893 -i 106895-02
Example 11: Listing All Configuration Parameter Values
# smpatch get -p password
Loading Tool: com.sun.admin.patchmgr.cli.PatchMgrCli from mars
Login to mars as user root was successful.
Download of com.sun.admin.patchmgr.cli.PatchMgrCli from mars was successful.
On machine mars:
patchpro.backout.directory - ""
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates.sun.com/solaris/
SunOS 5.10 Last change: 1 Dec 2005 16
System Administration Commands smpatch(1M)
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
patchpro.sun.passwd **** ****
patchpro.sun.user - ""
Lists the configuration settings for the system.
Example 12: Listing One or More Configuration Parameter
Values
# smpatch get -L patchpro.patch.source patchpro.download.directory
https://getupdates.sun.com/solaris/
/var/sadm/spool
Uses smpatch in local mode to list the values of the
patchpro.patch.source and the patchpro.download.directory
parameters.
Example 13: Reordering a List of Updates
# smpatch order -x idlist=/tmp/plist
Reorders the update list called /tmp/plist in an order that
is suitable for applying the updates.
Example 14: Removing an Update
# smpatch remove -i 102893-01
Removes update 102893-01.
Example 15: Specifying the Update Policy
# smpatch set \
patchpro.install.types=standard:singleuser:reconfigafter:rebootafter
Specifies the update policy for your system. The following
types of updates are allowed to be applied to your system:
o Standard updates
o Updates that must be applied in single-user mode
o Updates that require that the system undergo a reconfi-
guration reboot after they have been applied
o Updates that require that the system undergo a reboot
after they have been applied
SunOS 5.10 Last change: 1 Dec 2005 17
System Administration Commands smpatch(1M)
Example 16: Changing the Download Directory Location
# smpatch set patchpro.download.directory=/export/home/updates
Example 17: Specifying a Local Web Proxy
# smpatch set patchpro.proxy.host=webaccess.corp.net.com \
patchpro.proxy.port=8080
Specifies the host name, webaccess.corp.net.com, and port,
8080, of the local web proxy.
Example 18: Resetting a Configuration Parameter Value
# smpatch unset patchpro.patch.source
Resets the value of the patchpro.patch.source parameter to
its default value, which is the URL that points to the Sun
update server.
Example 19: Updating Your System
# smpatch update -L
Analyzes your local system, determines the appropriate
updates, downloads those updates to the download directory,
and applies those updates.
ENVIRONMENT VARIABLES
See environ(5) for a description of the JAVA_HOME environ-
ment variable, which affects the execution of the smpatch
command. The default value of this variable is /usr/java.
See the smc(1M) man page.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 Invalid command syntax. A usage message displays.
2 An error occurred while executing the command. An
error message displays.
ATTRIBUTES
SunOS 5.10 Last change: 1 Dec 2005 18
System Administration Commands smpatch(1M)
See the attributes(5) man page for descriptions of the fol-
lowing attributes:
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWswmt |
|_____________________________|_____________________________|
| Interface Stability | Evolving |
|_____________________________|_____________________________|
SEE ALSO
boot(1M), patchadd(1M), patchrm(1M), smc(1M), attributes(5),
environ(5)
Sun Update Manager 1.0 Administration Guide
SunOS 5.10 Last change: 1 Dec 2005 19
Man(1) output converted with
man2html and wrapped by fishsponge
This page was generated on Wed Sep 12 11:26:37 GMT 2007
|
Your favourite pages:
No pages logged yet... Top 10 most popular pages:
prstat man page (24546 hits)
(Solaris 10 11_06)
netcat man page (17695 hits)
(Suse Linux 10.1)
ssh-socks5-proxy-connect man page (13532 hits)
(Solaris 10 11_06)
signal man page (12551 hits)
(Suse Linux 10.1)
startproc man page (11991 hits)
(Suse Linux 10.1)
raidctl man page (11357 hits)
(Solaris 10 11_06)
adv_cap_autoneg man page (10286 hits)
(Solaris 10 11_06)
sqlite3 man page (9729 hits)
(openSUSE 10.2)
CPAN man page (8947 hits)
(Suse Linux 10.1)
BusyBox man page (7702 hits)
(Suse Linux 10.1)
|
Man Pages 
