|
Hopefully, this page is exactly what you are looking for, but if not, you can always find further assistance on Unix/Linux Forum!
File Formats dhcpsvc.conf(4)
NAME
dhcpsvc.conf - file containing service configuration parame-
ters for the DHCP service
DESCRIPTION
The dhcpsvc.conf file resides in directory /etc/inet and
contains parameters for specifying Dynamic Host Configura-
tion Protocol (DHCP) service configuration settings, includ-
ing the type and location of DHCP data store used.
The description of the dhcpsvc.conf file in this man page is
informational only. The preferred method of setting or modi-
fying values within the dhcpsvc.conf file is by using
dhcpconfig(1M) or the dhcpmgr(1M) utility. Do not edit the
dhcpsvc.conf file.
The dhcpsvc.conf file format is ASCII; comment lines begin
with the crosshatch (#) character. Parameters consist of a
keyword followed by an equals (=) sign followed by the
parameter value, of the form:
Keyword=Value
The following Keyword and Value parameters are supported:
BOOTP_COMPAT
String. automatic or manual. Enables support of BOOTP
clients. Default is no BOOTP. Value selects BOOTP
address allocation method. automatic to support all
BOOTP clients, manual to support only registered BOOTP
clients. server mode only parameter.
CACHE_TIMEOUT
Integer. Number of seconds the server caches data from
data store. Used to improve performance. Default is 10
seconds. server mode only parameter.
CONVER
Integer. Container version. Used by DHCP administrative
tools to identify which version of the public module is
being used to administer the data store. CONVER should
not be changed manually.
SunOS 5.10 Last change: 26 Jun 2003 1
File Formats dhcpsvc.conf(4)
DAEMON_ENABLED
TRUE/FALSE. If TRUE, the DHCP daemon can be run. If
FALSE, DHCP daemon process exits immediately if the dae-
mon is started. Default is TRUE. Generic parameter.
HOSTS_DOMAIN
String. Defines name service domain that DHCP adminis-
tration tools use when managing the hosts table. Valid
only when HOSTS_RESOURCE is set to nisplus or dns.
HOSTS_RESOURCE
String. Defines what name service resource should be
used by the DHCP administration tools when managing the
hosts table. Current valid values are files, nisplus,
and dns.
ICMP_VERIFY
TRUE/FALSE. Toggles ICMP echo verification of IP
addresses. Default is TRUE. server mode only parameter.
INTERFACES
String. Comma-separated list of interface names to
listen to. Generic parameter.
LOGGING_FACILITY
Integer. Local facility number (0-7 inclusive) to log
DHCP events to. Default is not to log transactions. Gen-
eric parameter.
OFFER_CACHE_TIMEOUT
Integer. Number of seconds before OFFER cache timeouts
occur. Default is 10 seconds. server mode only parame-
ter.
SunOS 5.10 Last change: 26 Jun 2003 2
File Formats dhcpsvc.conf(4)
PATH
Path to DHCP data tables within the data store specified
by the RESOURCE parameter. The value of the PATH keyword
is specific to the RESOURCE.
RELAY_DESTINATIONS
String. Comma-separated list of host names and/or IP
addresses of relay destinations. relay mode only parame-
ter.
RELAY_HOPS
Integer. Max number of BOOTP relay hops before packet is
dropped. Default is 4. Generic parameter.
RESCAN_INTERVAL
Integer. Number of minutes between automatic dhcptab
rescans. Default is not to do rescans. server mode only
parameter.
RESOURCE
Data store resource used. Use this parameter to name the
public module. See the PATH keyword in dhcp_modules(5).
RESOURCE_CONFIG
String. The private layer provides for module-specific
configuration information through the use of the
RESOURCE_CONFIG keyword. See dhcp_modules(5).
Providers can access RESOURCE_CONFIG using the configure
function by specifying an optional service provider
layer API function:
int configure(const char *configp);
SunOS 5.10 Last change: 26 Jun 2003 3
File Formats dhcpsvc.conf(4)
If this function is defined by the public module pro-
vider, it is called during module load time by the
private layer, with the contents of the RESOURCE_CONFIG
string acquired by the administrative interface (in the
case of the dhcpmgr, through the use of a public
module-specific java bean extending the dhcpmgr to pro-
vide a configuration dialog for this information.
RUN_MODE
server or relay. Selects daemon run mode. Default is
server.
SECONDARY_SERVER_TIMEOUT
Integer. The number of seconds a secondary server waits
for a primary server to respond before responding
itself. Default is 20 seconds. This is a server mode
only parameter.
UPDATE_TIMEOUT
Integer. Number of seconds to wait for a response from
the DNS server before timing out. If this parameter is
present, the DHCP daemon updates DNS on behalf of DHCP
clients, and waits the number of seconds specified for a
response before timing out. You can use UPDATE_TIMEOUT
without specifying a number to enable DNS updates with
the default timeout of 15 seconds. If this parameter is
not present, the DHCP daemon does not update DNS for
DHCP clients.
VERBOSE
TRUE/FALSE. Toggles verbose mode, determining amount of
status and error messages reported by the daemon.
Default is FALSE. Set to TRUE only for debugging. Gen-
eric parameter.
SEE ALSO
dhcpmgr(1M), in.dhcpd(1M), dhcp(5), dhcp_modules(5)
SunOS 5.10 Last change: 26 Jun 2003 4
File Formats dhcpsvc.conf(4)
System Administration Guide: IP Services
SunOS 5.10 Last change: 26 Jun 2003 5
Man(1) output converted with
man2html and wrapped by fishsponge
This page was generated on Wed Sep 12 21:37:26 GMT 2007
|
Your favourite pages:
No pages logged yet.
Trying to save cookie... Top 10 most popular pages:
sqlite3 man page (5334 hits)
(openSUSE 10.2)
svn man page (5208 hits)
(FreeBSD 6.2)
adv_cap_autoneg man page (4870 hits)
(Solaris 10 11_06)
CPAN man page (4607 hits)
(Suse Linux 10.1)
ssh man page (4342 hits)
(Suse Linux 10.1)
ssh-socks5-proxy-connect man page (2876 hits)
(Solaris 10 11_06)
netcat man page (2717 hits)
(Suse Linux 10.1)
pprosetup man page (2487 hits)
(Solaris 10 11_06)
startproc man page (2471 hits)
(Suse Linux 10.1)
signal man page (2407 hits)
(Suse Linux 10.1)
|
Man Pages 
